For NMR studies where chemical compounds such as hydrofluoric acid, ammonium bifluoride, and concentrated hydroxide solutions are present. Our fluoropolymer tube liners have a thin-wall construction that minimizes filling-factor losses. Supplied with a PTFE plug closure.
TL-5-7
5
approx. 0.35ml
TL-10-7
10
approx. 2.00ml
TL-5-7 Fluoropolymer NMR Tube Liner, 5mm, 7" Long
Item no:
TL-5-7
Tube Size (mm):
5
Volume at 50mm:
approx. 0.35ml
TL-10-7 Fluoropolymer NMR Tube Liner, 10mm, 7" Long
Item no:
TL-10-7
Tube Size (mm):
10
Volume at 50mm:
approx. 2.00ml
For Silicon and Boron NMR, we recommend the use of either TL-5-TUBEKIT for 5mm probes or TL-10-TUBEKIT for 10mm probes. The kit is designed for either Varian, Bruker, or JEOL spinners as a holding device for the fluoropolymer liner. Probe only “sees” fluoropolymer, allowing for excellent 29Si and 11B spectra.
TL-5-TUBEKIT
two o-rings & one 5mm open-end tube
TL-10-TUBEKIT
two o-rings & one 10mm open-end tube
TL-5-TUBEKIT : 2 O-Rings, 1 Open-Ended 5mm Tube
Item no:
TL-5-TUBEKIT
Tube Size (mm):
Volume at 50mm:
TL-10-TUBEKIT : 2 O-Rings, 1 Open-Ended 10mm Tube
Item no:
TL-10-TUBEKIT
Tube Size (mm):
Volume at 50mm:
1001 Innovation Drive
PO Box 1707
Morganton, NC 28680
USAPhone: +1 828 584 2600
Fax: +1 828 584 2604
Copyright ©2022 Norell®
